Solar Light for Garden, Street and Courtyard With Remote Controller 1000 Lumen ECOSCL-01R

OUTDOOR SOLAR LIGHT WITH REMOTE CONTROL

The outdoor lamp with adjustable photo-voltaic panel and remote control is made of aluminum and plastic and is ideal for illuminating dark areas in gardens, avenues, streets and squares.
Its aesthetic appearance makes it an outdoor lamp to all effects and can be installed in any architectural context.

How much space can this SOLAR POWERED LIGHT illuminate?

The outdoor lamp illuminates an area of around 90 square meters at maximum power. If installed at a distance of 8/10 meters from each other, you will have continuous lighting.

Solar lamp 1000 lumen

Customer installed the solar lamp to illuminate him small parking

Solar light used for gate

PARTS THAT MAKE THE OUTDOOR LAMP:

– SOLAR PANEL: The 6.8Watt solar panel placed at the top of the outdoor lamp has the function of charging the battery.
– BATTERY: The internal battery of 3.7V 12000mAh, has the function with full charge, to turn on the lamp for 3 consecutive nights even in bad weather.
– LED: 30 LEDs inside the solar-powered garden lamp are 30 and emit a luminous flux of 1000 lumens.
– LIGHT SENSOR: The light sensor has the function of automatically turning on the solar led street light when the sun goes down and to have it automatically shut off when the sun rises again in the morning.
– MOTION SENSOR: The motion sensor has the function of turning on the solar lamp, at maximum power when it detects a presence.

ADVANTAGES OF A SOLAR LAMP:

– INSTALLATION: The installation of the solar lamp is very simple, just fix it on a pole with a diameter of 60mm (POLE NOT INCLUDED) using the supplied brackets. The solar lamp can be tilted at 0 ° -15 ° -30 ° to the sun in order to have direct sunlight.
– NO CABLE: Thanks to its solar energy operation system, the solar powered garden lamp does not need to be connected to the electricity grid.
– NO INCREASE IN BILL: Because it is not connected to the electricity grid, the solar-powered lamp will guarantee lighting throughout the night without increasing your bill.

GARDEN LAMP WORKS:

– DURING THE DAY: During the day the outdoor lamp is switched off and the solar panel recharges the internal battery.
– DURING THE NIGHT: When the sun goes down, the solar street light automatically turns on. Through the remote control you can choose from six operating modes.
– Once the lamp is switched on using the switch, the active mode is M1. This mode makes the lamp work as follows: The lamp lights up when the sun goes down with a 10% light intensity. When the sensor detects a presence the light intensity reaches 100% for 30 sec. and then return to the initial brightness.
With the remote control, you can select CONSTANT MODE, M2 or return to M1.
– CONSTANT MODE: You can choose to operate the street lamp with solar energy at constant light at 10% – 30% – 60% – 100% for a period (that can be selected with the remote control) that goes from 1 hour to 8 hours. After the selected hours, the lamp will work with the STANDARD MODE (M1).
– M2: The outdoor lamp comes on with a light intensity of 30%, when the motion sensor detects a presence, the light intensity increases to 100% for 30 sec. and then return to the initial brightness.

WHERE TO INSTALL THE GARDEN LAMP WITH THE PHOTOVOLTAIC PANEL:

– BOULEVARD LIGHTING: By installing the solar lamp at a distance of 8/10 meters from one another, there will be continuous light
– GARDEN ILLUMINATION AND OTHER DARK ZONES

Technical specifications